China Categories
Faster injection speed injection molding company Model K2-500
Ask Latest Price
Brand Name:VAINO
Model Number:k2-500
Certification:CE/ISO9001:2008
Delivery Time:15-25 working days after confirm order and received deposit
Company Data
Active Member
Contact Person
Tina Kui
Business Type:
86-574-88054805
Business Type:
Manufacturer Exporter Seller
Officials:
Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Quality:
Quality Certifitation Available
Product Details
Company Profile
Product Details
Faster injection speed Variable Pump Injection Molding Machine Model K2-500
Selling points
- More fast cycle:valve panel design in bigger hole with bigger oil pipe.Oil go though the valve more fast flow and the Machine action more goes more faster in mould open and ejector process.
- Material charging more faster:Adopt proportional control for backpressure,can be set in the controller ,more smart and easy operation.when material charging,you can set 0 in the backpressure,so the charging will be more efficient and faster.make sure every shot to be more accurate than manual control type.
- Adopt Techmation newest verison controller which is more fast response ,more output and input can be use for connection the robot in future.
- Hydraulic safty protection installed in both front and rear operation door.when any door is open,the hydraulic system will be shut down to provide more safty protect for the operators.
SPECIFICATIONS
| SPECIFICATIONS | ||||
| DESCRIPTION | UNIT | K2-500 | ||
| INJECTION | A | B | C | |
| SHOT VOLUME | CM3 | 1590 | 2042 | 2550 |
| SHOT WEIGHT | G | 1494 | 1919 | 2397 |
| (PS) | OZ | 52.3 | 67.2 | 83.9 |
| SCREW DIAMETER | MM | 75 | 85 | 95 |
| INJECTION PRESSURE | MPA | 204 | 159 | 127 |
| SCREW L:D RATIO | 21:1 | 21:1 | 18.7:1 | |
| SCREW STROKE | MM | 360 | ||
| SCREW SPEED (STEPLESS) | R/MIN | 0~150 | ||
| CLAMPING UNIT | ||||
| CLAMPING FORCE | KN | 5000 | ||
| OPENING STROKE | MM | 780 | ||
| PLATEN SIZE | MM*MM | 1180*1180 | ||
| SPACE BETWEEN TIE BARS | MM*MM | 830*830 | ||
| MOLD THICKNESS (MIN-MAX) | MM | 300~820 | ||
| MAX.DAYLIGHT | MM | 1600 | ||
| HYDRAULIC EJECTION STROKE | MM | 210 | ||
| HYDRAULIC EJECTION FORCE | KN | 111 | ||
| POWER UNIT | ||||
| HYDRAULIC SYSTEM PRESSURE | MPA | 17.5 | ||
| PUMP MOTOR(V/S) | KW | 45/2*28.3 | ||
| HEATING CAPACITY | KW | 35.4 | ||
| NUMBER OF TEMP CONTROL ZONES | 5+(NOZZLE ) | |||
| GENERAL | ||||
| DRY-CYCLE TIME | SEC | 5.2 | ||
| OIL TANK CAPACITY | L | 1150 | ||
| MACHINE DIMENSIONS | MXMXM | 9.2*1.8*2.4 | ||
| MACHINE WEIGHT | KG | 22000 | ||
IINJECTION UNIT
Double cyllinder injection system
high quality barrel and screw
MUlti stages of speed,pressure and position for injection hold on
and charge
postion or time hold on changeover
Scerw position transducer control
prevent the screw cold start
low speed high torque screw drive motor
Nozzle center adjust
Screw RPM show
Stainless steel Hopper
Water cooling for hopper throat
CLRMPLING UNIT
Five points double clamping unit
Transducer for mold open and close position
Mechanical safety device
Multi stage of mold open/close speed,pressure and position
Fast mold close
Automatic mold height adjustment
Low pressure mold protection
Box model platen
Auto centering lubrication system
HYDRRULICS
Variable displacement pump System
Servo System
Oil suck filiter
Oil temperature control and alarm
By-pass oil filter
ELECTRONICS
8.7' lcd solor screen
200sets of mold memory
Barrel temperature monitoring and thermocouple break alarm
System hardware i/o testing function
Interface for printer and floppy drlver
Electric motor safety protection
Emergency stop safeguard device
RCCESSORIES
Adlustable machine leveling pads
Easily damaged spare parts
Professional tools
Manual
OPTIONRL DEVICE
Wide range of injection unit for specific appliaction
Spacific material screw and barrel
Accumulator fast injection
Core pull fittings
Air blast fittings
Glass water regulations
Extended nozzle
Company Profile
VAINO INTERNATIONAL LIMITED
Ningbo Qiming Machinery Manufacturing Co.Ltd. was founded in 1998,it is a modern specialized enterprise in production of extrusion blowing molding machinery and injection molding machinery. Located in a world famous manufacturing center--Ningbo High Tech Economic And Technological Development Zone.
Vaino international limited is the sub marketing company especially
do the marketing ,offer service for injection molding machine ,
blow molding machine with accessories along with the solutions for
packing,labeling ....
Our customer covers more than 30 countries and areas all over the
world.
With the effort of the whole company, our team become very
professional in technical supporting ,pre-service and aftersales
service.
We guarantee 48hrs service and fast response and we believe that
Promise and responsibility is the most important thing in every
business section.
Top-quality,professional services,honest in trustworthiness.we are willing to carry out policy of superiority supported each others,to own the resoure mutually.Two-winners for development,and as always to create the brilliantness of future with the customers hand in hand!
Products scope:
Extrusion blow molding machine brief introduction:
There's some variouly change in the machine in order to produce
different products in the best way.
But there's standard machine structure below:
1.MP55 carriage movement 380MM, produce small items below
2L,max 2L with single head(depends on the design of the
products)
die head have option up to 6 head,have single and double station
optional
2.MP70 carriage movement 450mm,produce middle size below 5L,max 5L
with single head(depends on the design of the products)
die head have option up to 6 head,have single and double station
optional
3.MP80 carriage movement is 540mm,produce containers below 10L,max
10L with single head(depends on the design of the products)
die head have option up to 6 head,have single and double station
optional
4.MP70FS carriage movement is 520mm,customized design machine
according to products.
die head have option up to 6 head,single station only,expecially
for shampoo bottle,multi-layer
5.MP80FS carriage movement is 700mm/800mm/customized design machine
according to products.
die head have option up to 6 head,single station only
6.MP100D carriage movement 720
Single and double head optional better for 5L jerrycan in 2
cavities
7.MP85/90/100C Single station,accumulator head for 20-50L
chemical container
8.multi-layer/co-extrusion blow molding machine from 2layer-6layer
is one of our advanced technology machine.
Injection molding machine brief introduction:
From 70ton-1800ton ,Varibale pump,servo system optional.
special material PVC,PET,PC,PMMA,BMC customized machine
Standard series ,Higher level series optional for choose to produce
household products or precision IT or medical products....
HM series:economic machine with fixed pump( for factories
just start up)
K1 Series:Servo system
k2 series:Variable pump series
K3 series:Servo+(faster)
Automation:
auxiliary
equipment(auto-loader,dosser,mixer,chiller,crusher,compressor...)
solutions for caps(slitting,folding,wad filling,assembling)
solutions for bottle defleshing
printing solution(silk,heat transfer)
labeling solution(IML,Sticker labeling)
fully automatic packing solutions
leak test machine
Our customer:
Send your message to this supplier
You May Like
Close roop Variable Pump Injection Mould Machine 42kn 120 mm
Powerful injection speed Variable Pump Injection Molding Machine Professional
High Speed Variable Pump Injection Molding Machine Servo System K2-170
High effeciency energy saving injection molding machine with variable pump system K2-220
High production capacity Variable Pump Injection Molding Machine K2-280
High precison control PE PP daily products injection molding machine varibale pump
Bigger size variable pump injection molding machines Enery - saving K2-400
600 Ton Variable Pump Injection Molding Machine with Double oil tank
600 Ton Variable Pump Injection Molding Machine With Double Oil Tank , CE / ISO9001:2008
High Capacity Variable Pump Injection Molding Machine
High Precison Control PE PP Daily Products Injection Molding Machine Varibale Pump
Inquiry Cart
0