solution heat treatment DIN931 A4-70 Stainless Steel Hex Head Bolts

solution heat treatment DIN931 A4-70 Stainless Steel Hex Head Bolts

1. Product Description

Solution treatment: refers to the alloy heated to high temperature single-phase temperature holding, so that the excess phase dissolved in solid solution after the rapid cooling to get supersaturated solid solution of the heat treatment process.

Mainly to improve the plasticity and toughness of steel and alloy, for the preparation of precipitation hardening and so on.

So that the various phases of the alloy fully dissolved, strengthen the solid solution, and improve the toughness and corrosion resistance, to eliminate stress and softening, in order to continue processing or molding.

Stainless steel,an iron based material with a minimum of 10.5% chromium. This material is known for its corrosion resistance and has vdiffer strengths depending on the amount of chromium and nickel alloy. The chromium forms a protective layer when exposed to oxygen, keeping the steel underneath from corroding. There are over 150 grades of this material with the 304 and 316 series being the most common.

Stainless Steel often refers to steel with resistance to air, water, acid, alkali salt or other medium corrosion. According to the different composition of the alloy, respectively, focusing on stainless steel and acid resistance. Some steel, although with a stainless steel, but not necessarily acid, acid-resistant steel is usually a stainless steel. For the production of fasteners are mainly austenitic stainless steel, in people's daily life, often referred to as stainless steel is also austenitic stainless steel. We use the stainless steel fasteners, raw materials are mainly used austenitic 302,304,316 and "low nickel" 201 and so on.

That hex bolt hexagon head bolts (threaded portion) -C grade and hex head bolt (full thread) -C grade,, aka hex head bolt (crude) Gross hex head bolts, black iron screws.

2. Specification

3. Application

Austenitic stainless steel by softening treatment to soften, the general wire heated to 950 ~ 1150 ℃ or so, for some time, so that carbide and a variety of alloying elements are fully evenly dissolved in austenite, and then quickly quenched and cooled, Carbon and other alloying elements too late to precipitate, access to pure austenite, known as the solution treatment. The effect of solution treatment is 3 points.
⑴ make the wire and the composition of the same uniform, which is particularly important for raw materials, because the hot rolling wire sections of the rolling temperature and cooling rate is not the same, resulting in inconsistent organizational structure. At high temperatures, the atomic activity increases, the σ phase dissolves, the chemical composition tends to be uniform, and the uniform single-phase structure is obtained after rapid cooling.
⑵ eliminate processing hardening, in order to facilitate the cold processing. Through the solution treatment, the crooked lattice recovery, elongation and broken grain grain recrystallization, internal stress elimination, wire tensile strength decreased, elongation increased.
⑶ restore the inherent corrosion resistance of stainless steel. Due to cold processing caused by carbide precipitation, lattice defects, so that the corrosion resistance of stainless steel decreased. After the solution treatment, the corrosion resistance of the steel wire is restored to the best condition. (Mainly because of the solid solution temperature, the solid solubility of carbon is 0.1-0.15% higher, but at 500-700 degrees and 0.02% at room temperature, at the sensitized temperature, after the solution solution is supersaturated The carbon partially or completely precipitates from the austenite, where the chromium or iron forms carbide at the grain boundary, consumes a large amount of chromium, and the diffusion rate of chromium in the austenite is much greater than the diffusion rate of the lattice The diffusion rate of the inner chromium is much larger than the diffusion rate in the grain, so that the grain consumption of the grain boundary can not be supplemented from the grain,

Most Common Type of Hex Bolt. Available in Grade 2, Grade 5, Grade 8 & Stainless Steel. Partially Threaded in Most Cases.Cars, machinery, electronic products, furniture products, musical parts, computers, power switches, miniature switches, hardware and plastic molds, sports equipment and so on
Hex screws, standard parts, fasteners widely used in various mechanical equipment, electronic products, communications equipment, furniture and equipment, construction and other sectors of production, installation and maintenance.Roads, bridges, tunnels, urban railway systems, high speed railways, watercrafts, thermal power, wind power, nuclear power, transmission and distribution, mechanical equipment, petrochemical, aerospace, steel roof constructions and so on.

4. Advantages

Jiaxing Haina Fastener co. Ltd was established in 2010, located in the hometown of fasteners jiaxing city. For many years of export experience, our products has been best-selling in Europe, the United States, the Middle East and Southeast Asia. The products are manufactured by more functions machine, which is brought in domestic and foreign well-known enterprises. The products made are fully compatible with the international standards, well received by domestic and foreign customers. Through scientific management, Jiaxing Haina fastener Ltd company has been obtained ISO9000 certificate of Quality Managerment System, SGS and BV international certificate system of Make in China.

Product standards including DIN, ISO, GB and ASME/ANSI, BS, JIS AS. Main levels of carbon steel: 4.8, 4.8, 6.8, 8.8, 10.9, and 12.9 grade, the main material of stainless steel SS201, SS304, SS316 and various kinds of special stainless steel.

The width range of our products can be divided into auto fasteners, mechanical fasteners, construction fasteners, power fasteners, railway fasteners, household electrical appliances fasteners and chemical fasteners,

We have first-class service team, so we can meet the different requests for a set of customers. We solemnly commitment, first-grade quality, timely delivery guaranteed

Reasonable price and service paramount, forward to the operation principle of quality first and customer first, pursuit of excellence to create first-class brand, our aim is brand promoting development, management promoting earnings, warmly greeting home and abroad new and old customers to communicate and cooperate to seek greater success and brilliant future.