Citroen C2 C3 Throttle Body , Peugeot 307 Throttle Body High Precision

Auto Throttle Body For Citroen C2 C3 C4 Peugeot 307 1.6L (2000-) 4472.80

1, OE Number or Parts Number

4472.80 / 1635Q9 / 9635884080 / 447280 / 0 280 750 085 / 556154 / 7519125 / 88.116 / 89125

2, Fit Model

3 , Testing And Warranty

4 , Raw materials

• Material : China
• Electromagnetism : Anti-interference
• Processing capacity : Fine, High precision

5 , Advantage

⑴ electronic throttle control system is the biggest advantage of the engine can achieve the full range of the best torque output.

⑵ precise control of the throttle opening. First by the ECU on a variety of working conditions and sensor signals to make judgments and processing, and then calculate the best throttle opening, and then by the drive motor control throttle to achieve the corresponding throttle opening angle.

⑶ improve the engine emissions performance.
The ETC system provides precise control of the air-fuel ratio in all cases to make the combustion more adequate and also reduces the generation of exhaust gases. In the idle state, the throttle is kept at a very small opening angle to stabilize the combustion and improve fuel economy , Emissions are also under further control.

⑷ has a higher vehicle reliability.
Electronic throttle control system uses sensor redundancy design, from a control point of view, the use of a sensor can make the system normal operation, but the redundant design allows two sensors to detect each other, when a sensor failure can be identified in time,
To a large extent increased the reliability of the system to ensure the safety of traffic.

⑸ can choose a different mode of work.
The driver can choose different modes of operation through the mode switch according to the different driving needs. There are three modes: normal mode, power mode and snow mode. The difference is that the response speed of the throttle valve to the accelerator pedal is different.

⑹ get altitude compensation.
In areas with higher elevations, atmospheric pressure drops, air is thin, oxygen content decreases, resulting in engine output power drop. At this point, the electronic throttle control system can be in accordance with the atmospheric pressure and altitude as a function of the relationship between the throttle opening compensation to ensure that the engine output power and accelerator pedal position to maintain stability.

6 , FAQ (Fluently Asked Questions)

Q1. If we don't find the model type here, Please tell us.
1, Please send us your OEM number.
2, Please send us your photo and products size if you have.
3, Please tell us your exact car model if you do not have photo or OEM number.

Q2. What is your sample policy?
1, We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q3. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.

Q4. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q5. What is your terms of delivery?
1, EXW, FOB, CFR, CIF, DDU.

Q6. How about your delivery time?
1, Generally, it will take 3 to 35 days after receiving your advance payment. The specific delivery time depends on the item's inventory and the quantity of your order.

.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.