High Voltage Electronic Ignition Coil 100% Inspection For Mercedes - Benz S - Class

Mercedes-Benz Electronic Ignition Coil S-Class 3.0L 5.0L (1980-2001) 0001586503

1 , Oe Number Or Part Number

000 158 65 03 / A 000 158 65 03 / 0 221 502 435 / 0 040 100 299 / ZS 299 / 0 221 501 376

2 , Fit Model

3 , Testing And Warranty

4 , Raw Materials

• Copper wire : Japan and Germany
• PPO : Japan
• PBT : United States

5 , NC Ignition

In the modern high-speed gasoline engine gasoline engine, has been used by the microprocessor control of the ignition system, also known as digital electronic control ignition system. This ignition system consists of microcomputer (computer), a variety of sensors and ignition actuators in three parts.
In fact, in the modern engine, gasoline injection and ignition of the two subsystems are controlled by the same ECU, combined with a group of sensors. The sensors are basically the same as those in an electronically controlled gasoline injection system, such as a crankshaft position sensor, a camshaft position sensor, a throttle position sensor, an intake manifold pressure sensor, a deflagration sensor, and the like. The deflagration sensor is a very important sensor for electronic control ignition (especially the engine with exhaust turbocharger), which can monitor the degree of deflagration and deflagration of the engine as a feedback signal to enable the ECU command to achieve ignition The engine will not be deflated and can achieve higher combustion efficiency.
Digital electric control ignition system (ESA) according to the structure is divided into electrical and non-distributor type (DLI) two types. The electronic type ignition system of the electric distributor only generates a high voltage by using an ignition coil, and then the ignition plugs are ignited in turn by the distributor according to the ignition sequence. As the ignition coil primary coil of the work by the electronic ignition circuit commitment, so the distributor has been canceled off the device, only play a high voltage distribution function.
Double cylinder ignition
Double cylinder ignition means that two cylinders combined with an ignition coil, so this ignition can only be used for the number of cylinders on the even engine. If the two cylinder pistons are close to the top dead center (one is compressed and the other is exhaust), the two spark plugs share the same ignition coil and ignite at the same time, and one is the effective ignition. Invalid ignition, the former in the high-pressure low-temperature mixture, which is in low-pressure high-temperature exhaust gas, so the resistance between the two spark plugs completely different, the energy generated is not the same, resulting in much effective energy , About 80% of the total energy.
Ignition alone
The separate ignition method is to assign an ignition coil to each cylinder, and the ignition coil is mounted directly on the top of the spark plug, which also eliminates the high voltage line. This ignition is achieved by means of a camshaft sensor or by means of cylinder compression to achieve precise ignition. It is suitable for any number of cylinders and is particularly suitable for use with 4-cylinder engines per cylinder. Because the spark plug ignition coil assembly can be installed in the middle of the double overhead camshaft (DOHC), make full use of the gap space. Due to cancel the distributor and high-voltage lines, energy loss and leakage loss is minimal, no mechanical wear, and the cylinder of the ignition coil and spark plugs together, external metal package, greatly reducing the electromagnetic interference, can guarantee the normal engine control system jobs.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.