Numatics NF8327B102 II 2G/D Ex D IIC T4 Gb / Ex Tb IIIC Db Stainless Steel Explosion Proof Solenoid Valve

numatics NF8327B102 II 2G/D Ex d IIC T4 Gb / Ex tb IIIC Db Stainless steel Explosion proof solenoid valve

FEATURES
1. Solenoid valves with explosionproof operators NF or WSNF type for use in potentially explosive atmospheres according to ATEX Directive 2014/34/EU EU type examination certificate no.: LCIE 00 ATEX 6008 X IECEx Certificate of Conformity no.: IECEx LCI 07.0015X
2. Compliance with the Essential Health and Safety Requirements has been assured by compliance with the International and European Standards EN-IEC 60079-0, EN-IEC 60079-1 and EN-IEC 60079-31
3. The solenoid valves are recommended for pilot applications with high flow, wide pressure ranges and no minimum operating pressure
4. Special execution for low ambient and fluid temperatures
5. Manual Operators are optional including an under pressure removable type
6. The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability (TüV & Exida certification)

Electrical characteristics

Pictures and details

GENERAL
Differential pressure: 0 - 10 bar [1 bar =100 kPa]
Maximum viscosity: 65 cSt (mm2/s)
Response time: < 100 ms

MATERIALS IN CONTACT WITH FLUID
Body: Brass or stainless steel AISI 316L
Stem, core tube: Stainless steel
Core and plugnut: Stainless steel
Springs: Stainless steel
Seals & poppets: ? 5,7 mm: FPM or VMQ or (F)VMQ
? 12 mm: NBR or FPM or (F)VMQ

Rider ring PTFE
OTHER MATERIALS
Solenoid enclosure NF: Chromated aluminium, epoxy coated
WSNF: Stainless steel (AISI 316L)
Bonnet, cover screws NF: Steel (zinc plated)
WSNF: Stainless steel
Core tube: Stainless steel
Core and plugnut: Stainless steel

ELECTRICAL CHARACTERISTICS SAFETY CODE
Coil insulation class H (5,7 mm), F (12 mm) IECEx / q II 2 G Ex d IIC T6..T4
Coil connection Screw terminals IECEx / q II 2 D Ex t IIIC Db IP67 T85°C..T135°C
Electrical safety IEC 335
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz

ADDITIONAL OPTIONS
1. Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10
2. Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 2014/34/EU (see “Explosionproof solenoids” section)
3. Electrical enclosures according to “NEMA” standards are available
4. Compliance with “UL”, “CSA” and other local approvals available on request
5. 3/8” pipe thread executions are available on request
6. Stainless steel exhaust protector for valves certified to IEC 61508 Functional Safety, catalogue number: 34600419 (G1/4) or 34600479 (G1/2)
7. Other pipe connections are available on request
8. Any ATEX approved cable entry device can be fitted in the 1/2” NPT threaded entry hole (M20 x 1.5 in option), refer to the nameplate for identification of the maximum cable temperature

INSTALLATION
1. The solenoid valves can be mounted in any position without affecting operation
2. Solenoid valves have 2 or 3 mounting holes in body
3. Pipe connection identifier is 8 = NPT (ANSI 1.20.3)
4. Installation/maintenance instructions are included with each valve

Dimension

Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
Competitive Advantage

After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.

FLY Automation Co.,Ltd was founded in 2010.

We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation units, cylinders, air gun,  PU/PE pneumatic & hydraulic tubes and pneumatic accessories. 
Our factory is in the national tourist resort---Fenghua District, Ningbo, China, adjoins the world-class deep water harbor------Beilun port, 2 hours driving to Shanghai, only 15kms away from Ningbo Lishe International Airport, whereby it enjoys great traffic convenience.

Our products quality is strictly controlled according to ISO quality standard. The perfect producing and testing equipments, advanced quality management system, professional manufacture and sales team guaranteed our forceful before-sale and after-sale service.

We keep the policy “Favorable price, on-time delivery, steady quality, ceaseless development heart-to-heart service and Win-win mode”.

We warmly welcome new and old customers in domestic and overseas market cooperate with us!