DN50/2'' Inch Port Brass Body 2W500-50 Water Diaphragm Solenoid Valves/Electromagnetic Water Valve Direct Driving Type

DN50/2'' Inch Port Brass Body 2W500-50 Water Diaphragm Solenoid Valves/Electromagnetic Water Valve Direct Driving Type

2W500-50 two-position two-way diaphragm water solenoid valve series, also known as water solenoid valve, is made of brass. The pipe adopts direct double-connection diaphragm type power on and off type to control the automatic switch of liquid, such as water, oil and gas in the pipe. It is an improvement on the previous one. The valve body adopts diaphragm structure without starting pressure, which can be directly used under zero pressure difference, extending the service life of the solenoid valve and broadening its service field. The use of nitrile butadiene rubber as a sealing material improves the safety of the product in a wide range of environments.

2W500-50 solenoid water valves are wide used in medical machinery, solar energy, cleaning equipment, food machinery, burner, welding and cutting, fire safety, environmental protection, water treatment, machinery manufacturing and other industries.

Technical data of brass body 2W500-50 water diaphragm solenoid valves:

Diferent sizes of 2W series Electromagnetic diaphragm water valves:

Exploded pictures of DN50/2'' inch inlet & outlet 2W500-50 water diaphragm valves:

Application of AC220V/24VDC 2W series electric water control valves:

Solenoid valve selection pay attention to its applicability

1. The fluid in the line must match the medium calibrated in the selected solenoid valve series.

2. The temperature of the fluid must be less than the calibration temperature of the solenoid valve selected.

3. Solenoid valves allow liquid viscosity to be generally below 20 CST, greater than 20 CST should be noted.

4. When the fluid cleanliness is not high, the filter should be installed in front of the solenoid valve. Generally, the solenoid valve requires good cleanliness for the medium.

5. Pay attention to the flow aperture and the diameter of the nozzle; the solenoid valve is generally only controlled by the two-position switch; if necessary, please install the bypass tube for easy maintenance; when there is water hammer, customize the opening and closing time of the solenoid valve.

6. The power supply current and power consumption should be selected according to the output capacity. The power supply voltage is generally allowed to be ±10%. It must be noted that the VA value is higher when the AC starts.

The working principle of 2W series electromagnetic water valves:

The pilot valve of the secondary valve opening is mainly composed of a pilot valve and a main valve, and adopts a rubber sealing structure. When in the normal position, the pilot valve is sealed with a movable iron core, the pressure in the valve chamber is balanced, and the main valve is closed. When the coil is energized, an electromagnetic force is generated to absorb the moving core, and the dielectric self-guide valve port in the main valve chamber is exhausted, resulting in a pressure differential. The diaphragm or valve cup is lifted quickly, the main valve port opens, and the valve shows the path. When the coil is de-energized, the magnetic field disappears, the active core is reset, the valve port is closed, and the valve is closed when the valve and the main valve chamber are in pressure.

Electromagnetic water valve, the solenoid valve has a closed cavity, and a hole is opened at different positions, each hole leads to a different tube, between the cavity valve, two electromagnets are on both sides, and the electric valve facing the electromagnetic coil is Which side is attracted to, by controlling the movement of the valve body or the leakage of different oil holes, the oil hole is always open, the hydraulic oil will enter different oil discharge ports, and then the cylinder piston is pushed by the oil pressure, the piston drives the piston rod, the piston rod Drive mechanism.

Welcome to your enquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on