2/2 Way 1 Inch Corrosion Resistant SS Electric Solenoid Valve Stainless Steel Water Air Oil N/C 2S250-25

2/2 way 1 Inch Corrosion Resistant SS Electric Solenoid Valve Stainless Steel Water Air Oil N/C 2S250-25

2way of general purpose of direct action and semi-direct elevator valves of action.

Common applications include water, oil (below 20cst), air, gas, freon, * vacuum, weak alkaloid acids.

available on a body/seal material of bronze/NBR or stainless steel/viton.

the coil has an adapter with screw terminals for conducting wires.

simple connect the wires to the adapter and connect right into the coil for operation.

adapters can be removed from the coil for maintenance without having to remove the wires.

bronze/NBR valves ar e suitable for water, hot water, gas, air, non-corrosive oils and freon.

Stainless steel/Viton valves are suitable for hot water, acid, alkaline, chemical salt, oils and hydrocarbons.

Direct action: These valves close or open completely on their own.

That means they can block the flow of fluid in both directions.

semidirect Actions: These valves can only stop the flow in one direction.

There is an arrow located in the valve body showing the direction of the flow in which it blocks.

in order to avoid reflux when the valve is closed, a restraint valve shall be installed

Feature:

Adopting straight-action without pressure starting enlarges its applicable scopes.
Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
Selecting encapsuled coil improves the safe application of this product under many environments.

1.Brass Body,Strong corrosion resistance and beautiful appearance

2.Copper Coil,Tightly wounded, full of weight

3.At the wire joint, it is further processed and safer and more reliable.

4.Spring diaphragm for durability and aging resistance

Specification:

Model Number:2S-200-20

Material:Brass Body,Copper Coil

Medium:Water,air,oil

Pressure:0-0.8MPa

Liquid Temperature:-5~80℃

Port Size:3/4"

Voltage:DC24V,AC110V,AC220V.

Dimension Diagram:

Water Valve Detail:

Tips: All accessories can be sold separately as repair parts (Diaphragm, Solenoid Coil, Armature Assembly)

Youtube video of water solenoid valve

Selection basis:

First,Select the diameter specification (ie DN) and interface mode of the solenoid valve according to the pipeline parameters.

1.Determine the diameter (DN) size according to the inner diameter of the pipeline or the flow requirement.

2.interface mode, general > DN50 to choose the flange interface, ≤ DN50 can be freely selected according to user needs.

Second,Select the material and temperature group of the solenoid valve according to the fluid parameters

1.corrosive fluid: should choose corrosion-resistant solenoid valve and all stainless steel; edible ultra-clean fluid: food grade stainless steel solenoid valve should be used.

2.high temperature fluid: to choose the use of high temperature resistant electrical materials and sealing materials made of solenoid valves, and to choose the type of piston structure.

3.the fluid state: large to have a gaseous state, liquid or mixed state, especially when the caliber is larger than DN25 when ordering must be distinguished.

4.fluid viscosity: usually below 20cSt can be arbitrarily selected, if the viscosity is high, you should use high viscosity solenoid valve.

Third,Select the principle and structure of the solenoid valve according to the pressure parameters

1.Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined according to the nominal pressure of the pipeline.

2.Working pressure: If the working pressure is low, the direct-acting or step-by-step direct-acting principle must be used; when the minimum working pressure difference is above 0.04Mpa, direct-acting, step-by-step direct-acting or pilot-operated can be used.

Fouth,Voltage selection: The voltage specification should be as convenient as possible for AC220V and DC24.

Fifth,Select auxiliary functions according to environmental requirements: explosion-proof, waterproof fog, water shower, diving.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on