China Categories
Low Noise Compact Structure Sl4005 Air Root Blower Three Lobe Double Oil Tank
Ask Latest Price
Brand Name:JSMY
Model Number:SL4005 / SL5003 / SL5006 /SL5009
Certification:ISO9001
Price:Negotiable
Payment Terms:L/C, T/T
Delivery Time:1 WEEK
Company Data
Verified Supplier
Contact Person
Amelia
Business Type:
Manufacturer Exporter Seller
Officials:
ADD:NO.122,XIZHANG ROAD, GUSHAN TOWN INDUSTRIAL PARK,JIANGYIN,CHINA
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Low Noise Compact Structure Three-Lobe Double Oil Tank Roots Air Blower
Product Description
1)The Roots blower is a volumetric fan.
2)The air flow is proportional to the speed. The three-lobe impeller rotates each time,and two impellers breathe and exhaust for three times
Compared with the two-lobe type, the gas pulsation is less,the load changes is smaller, the mechanical strength is stronger, the noise is low, and the vibration is small
3) There are 2pcs three-lobe impellers on the two parallel shafts. The slight gap is between the impellers and the inner surface of the elliptical tank and each impeller.
The impeller rotates at a constant speed in the opposite direction. A certain amount of gas surrounded by the tank and the impellers is transported from suction side to exhaust side
4) Each impeller and synchronizing gear always keep the correct phase position, mutual contact does not be happened , so it can be speeded up without internal lubrication, it is simple , stable operation and performance, it adapts to various purposes and uses in a wide range of fields.
Three lobe impellers working principle
Main structure
Main features:
- Driven by helical synchronous gears: Balanced transmission, low noise
- Adopting the advanced impeller curve in the world: increasing the Volume ratio, high efficiency
- All bearings are imported from NSK or SKF bearing, it has good loading performance and long lifetime.
- The oil seal is used CR seal imported from USA.
- Cooling way is air-cooled and water-cooled
- The impeller uses the impeller & shaft integrated structure. It avoids the defects of the impeller shaft split structure.
- Compact structure, the same inlet and outlet impeller structure, flexible installation
- There are various installation ways. The air blower can be installed into horizontal air inlet and vertical air inlet using the same bottom
- It can also change the position of the drive shaft, right or left shaft drive, upper shaft or lower shaft drive
- Double oil tank structure, splash lubrication is used on the gear end and the drive end, which improves the better heat dissipation, and also improves the better lubrication effect of the bearing and gear
Roots air blower installations reference
Impeller CNC machining center
The impeller is the impeller & shaft integrated shaped of QT500-7. It is integrally processed by machining center to avoid the shortcomings caused by the separation of the impeller and shaft (deformation, thermal expansion, misalignment, wear, etc.)
Roots Blower Performance Test Center
Our company uses the microcomputer roots blower test system which is jointly developed by our well-known test development and research institutions in china under the technical guidance of Japanese and American companies.
This test system introduces advanced CRAS signal acquisition and monitoring system
According to the national industry standard <<JB/T8941.2-1999 general purpose Roots air blower performance test method>>, it is equipped with various signal sensors and display instruments that meet the requirements of test accuracy, high reliability and easy observation.
It collects the air flow, wind pressure, noise, vibration, speed, temperature, current, voltage and other signals into the computer. It can realize online monitoring, analysis, record storage by computer, and it is the leading level among domestic counterparts
Roots Blower Model Selection:
- Application: Blower or Vacuum
- Air properties: air name, state, temperature, whether it is corrosive and explosive.
In the case of mixed air, please indicate the composition ratio and molecular weight.
- Pressure: Kgf/Cm2 , mmH2o, mmHg, Pa
- Air flow: M3/min the reference condition(N: 01, a standard atmospheric pressure, dry air state air flow)
Standard condition (S: 201, a standard atmospheric pressure, relative humidity 65% state air flow)
Suction condition(Suction temperaturepressure, temperature value)
- Installed Site: indoor, outdoor, ambient temperature, whether there is a dangerous place
- Motor: model, output power, number of poles, other requirements
- Drivingway: Coupling,V-belt
- Others: Running time,accessories and spare parts, painting color
- The allowable range of the air flow at the specified pressure is ±5%
Specifications
| model | Exhaust Port Dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
| RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/ min | KW | M3/ min | kW | M3/ min | KW | M3/ min | KW | M3/ min | KW | M3/ min | KW | M3/ min | KW | M3/min | KW | |||
|
SL 4005 |
50 (2”) | 1000 | 2.46 | 0.80 | 2.11 | 1.30 | 1.88 | 1.80 | 1.67 | 2.40 | 1.48 | 2.90 | 1.25 | 3.50 | ||||
| 1200 | 3.11 | 0.90 | 2.78 | 1.60 | 2.53 | 2.20 | 2.32 | 2.90 | 2.13 | 3.50 | 1.91 | 4.20 | 1.76 | 4.70 | ||||
| 1400 | 3.76 | 1.10 | 3.43 | 1.80 | 3.18 | 2.60 | 2.97 | 3.30 | 2.78 | 4.10 | 2.56 | 4.90 | 2.42 | 5.50 | ||||
| 1600 | 4.41 | 1.20 | 4.08 | 2.10 | 3.83 | 2.90 | 3.62 | 3.80 | 3.43 | 4.70 | 3.22 | 5.60 | 3.07 | 6.30 | ||||
| 1800 | 5.06 | 1.40 | 4.73 | 2.30 | 4.48 | 3.30 | 4.27 | 4.30 | 4.08 | 5.30 | 3.87 | 6.20 | 3.72 | 7.10 | ||||
| 2000 | 5.71 | 1.50 | 5.38 | 2.60 | 5.13 | 3.70 | 4.92 | 4.80 | 4.73 | 5.90 | 4.52 | 6.90 | 4.38 | 7.90 | ||||
| 2200 | 6.36 | 1.70 | 6.03 | 2.80 | 5.78 | 4.00 | 5.57 | 5.20 | 5.38 | 6.40 | 5.18 | 7.60 | 5.03 | 8.70 | ||||
|
SL 5003 |
65 (2.5”) | 800 | 2.37 | 1.00 | 2.02 | 1.60 | 1.75 | 2.10 | 1.63 | 2.60 | 1.43 | 3.20 | 1.23 | 4.02 | ||||
| 1000 | 3.18 | 1.30 | 2.83 | 2.00 | 2.56 | 2.60 | 2.43 | 3.30 | 2.13 | 4.00 | 1.95 | 4.60 | 1.75 | 5.50 | ||||
| 1200 | 3.98 | 1.50 | 3.63 | 2.40 | 3.36 | 3.20 | 3.13 | 4.00 | 2.93 | 4.80 | 2.75 | 5.60 | 2.59 | 6.40 | ||||
| 1400 | 4.78 | 1.80 | 4.43 | 2.70 | 4.16 | 3.70 | 3.94 | 4.60 | 3.74 | 5.60 | 3.56 | 6.50 | 3.39 | 7.40 | 3.24 | 8.40 | ||
| 1600 | 5.59 | 2.10 | 5.24 | 3.00 | 5.17 | 4.20 | 4.94 | 5.30 | 4.68 | 6.40 | 4.56 | 7.40 | 4.29 | 8.50 | 4.14 | 9.60 | ||
| 1800 | 6.39 | 2.30 | 6.04 | 3.50 | 5.87 | 4.70 | 5.75 | 5.90 | 5.45 | 7.10 | 5.17 | 8.50 | 5.09 | 9.60 | 4.98 | 10.80 | ||
| 2000 | 7.20 | 2.60 | 6.85 | 3.90 | 6.66 | 5.30 | 6.54 | 6.60 | 6.35 | 7.90 | 6.06 | 9.60 | 5.80 | 10.60 | 5.65 | 12.00 | ||
| 2200 | 8.00 | 2.80 | 7.65 | 4.30 | 7.38 | 5.80 | 7.16 | 7.30 | 6.96 | 8.70 | 6.78 | 10.6 | 6.61 | 11.70 | 6.45 | 13.20 | ||
| model | Exhaust port Dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 5006 |
100 (4”) | 800 | 3.84 | 1.30 | 3.35 | 2.20 | 2.97 | 3.00 | 2.66 | 3.80 | 2.38 | 4.70 | 2.12 | 5.50 | ||||
| 1000 | 5.34 | 1.70 | 4.98 | 2.70 | 4.78 | 3.80 | 4.66 | 4.80 | 4.53 | 5.90 | 4.38 | 6.90 | 3.97 | 7.90 | ||||
| 1200 | 6.36 | 2.00 | 6.25 | 3.30 | 6.01 | 4.50 | 5.88 | 5.80 | 5.46 | 7.00 | 4.98 | 8.88 | 4.65 | 9.50 | ||||
| 1400 | 7.88 | 2.30 | 7.78 | 3.80 | 7.56 | 5.30 | 7.46 | 6.70 | 7.23 | 8.20 | 6.90 | 9.70 | 6.56 | 11.10 | 6.34 | 12.60 | ||
| 1600 | 9.70 | 2.70 | 9.55 | 4.30 | 9.37 | 6.00 | 9.12 | 7.70 | 8.76 | 9.40 | 8.21 | 11.00 | 8.05 | 12.70 | 7.88 | 14.40 | ||
| 1800 | 11.13 | 3.00 | 11.00 | 4.90 | 10.67 | 6.80 | 10.23 | 8.70 | 9.88 | 10.50 | 9.50 | 12.40 | 9.18 | 14.30 | 8.89 | 16.20 | ||
| 2000 | 12.39 | 3.30 | 12.22 | 5.40 | 11.78 | 7.50 | 11.56 | 10.20 | 11.34 | 11.70 | 11.11 | 13.80 | 10.89 | 15.90 | 10.22 | 18.00 | ||
| 2200 | 13.64 | 3.70 | 13.15 | 6.00 | 12.78 | 8.30 | 12.46 | 10.60 | 12.18 | 12.90 | 11.93 | 15.20 | 11.69 | 17.50 | 11.48 | 19.80 | ||
|
SL 5009 |
100 (4”) | 800 | 5.83 | 1.70 | 5.20 | 2.90 | 4.72 | 4.20 | 4.32 | 5.40 | 3.96 | 6.00 | 3.62 | 6.90 | ||||
| 1000 | 7.98 | 2.10 | 7.67 | 3.70 | 7.32 | 5.20 | 7.04 | 6.70 | 6.80 | 8.30 | 6.45 | 9.30 | ||||||
| 1200 | 9.50 | 2.60 | 8.87 | 4.40 | 8.39 | 6.20 | 7.99 | 8.10 | 7.63 | 9.90 | 7.21 | 10.90 | ||||||
| 1400 | 11.33 | 3.00 | 10.71 | 5.10 | 10.23 | 7.30 | 9.82 | 9.40 | 9.47 | 11.60 | 9.12 | 12.60 | ||||||
| 1600 | 13.17 | 3.40 | 12.54 | 5.90 | 12.03 | 8.30 | 11.66 | 10.80 | 11.30 | 13.20 | 10.78 | 15.20 | ||||||
| 1800 | 15.00 | 3.90 | 14.38 | 6.60 | 13.90 | 9.40 | 13.49 | 12.10 | 13.14 | 14.90 | 12.14 | 16.90 | ||||||
| 2000 | 16.84 | 4.30 | 16.21 | 7.40 | 15.73 | 10.40 | 15.33 | 13.50 | 14.97 | 16.50 | 13.57 | 18.50 | ||||||
| 2200 | 18.67 | 4.70 | 18.05 | 8.10 | 17.57 | 11.50 | 17.16 | 14.80 | 16.81 | 18.20 | 16.11 | 20.20 | ||||||
| model | Exhaust port dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 6005 |
80 (3”) | 800 | 4.63 | 1.70 | 4.07 | 2.70 | 3.65 | 3.60 | 3.29 | 4.60 | 2.97 | 5.60 | 2.68 | 6.60 | 2.42 | 7.60 | ||
| 1000 | 6.13 | 2.10 | 5.57 | 3.30 | 5.14 | 4.60 | 4.78 | 5.80 | 4.46 | 7.10 | 4.17 | 8.30 | 3.91 | 9.50 | 3.66 | 10.80 | ||
| 1200 | 7.62 | 2.50 | 7.07 | 4.00 | 6.64 | 5.50 | 6.28 | 7.00 | 5.96 | 8.50 | 5.67 | 10.00 | 5.76 | 11.50 | 5.00 | 12.90 | ||
| 1400 | 9.12 | 2.90 | 8.56 | 4.60 | 8.13 | 6.40 | 7.77 | 8.10 | 7.45 | 9.90 | 7.17 | 11.60 | 6.90 | 13.40 | 6.65 | 15.10 | ||
| 1600 | 10.61 | 3.30 | 10.06 | -- | 9.63 | 7.30 | 9.27 | 9.30 | 8.95 | 11.30 | 8.66 | 13.30 | 8.40 | 15.30 | 8.15 | 17.30 | ||
| 1800 | 12.11 | 3.70 | 11.55 | 6.00 | 11.12 | 8.20 | 10.76 | 10.50 | 10.44 | 12.70 | 10.16 | 14.90 | 9.89 | 17.20 | 9.64 | 19.40 | ||
| 2000 | 13.60 | 4.10 | 13.05 | 6.60 | 12.62 | 9.10 | 12.26 | 11.60 | 11.94 | 14.10 | 11.65 | 16.60 | 11.39 | 19.10 | 11.14 | 21.60 | ||
|
SL 6008 |
125 (5”) | 800 | 7.41 | 2.30 | 6.51 | 3.80 | 5.83 | 5.40 | 5.25 | 7.00 | 4.74 | 8.60 | 4.28 | 10.20 | 3.86 | 11.80 | ||
| 1000 | 10.45 | 2.80 | 9.88 | 4.80 | 9.46 | 6.80 | 9.12 | 8.80 | 8.53 | 10.80 | 8.21 | 12.80 | 7.88 | 14.80 | 7.12 | 16.70 | ||
| 1200 | 12.98 | 3.40 | 12.29 | 5.80 | 11.61 | 8.20 | 11.12 | 10.50 | 10.52 | 12.90 | 10.21 | 15.30 | 9.64 | 17.70 | 9.25 | 20.10 | ||
| 1400 | 15.58 | 3.90 | 15.12 | 6.70 | 14.77 | 9.50 | 14.42 | 12.30 | 13.91 | 15.10 | 13.45 | 17.90 | 13.01 | 20.70 | 12.64 | 23.40 | ||
| 1600 | 16.97 | 4.50 | 16.45 | 7.70 | 15.99 | 10.90 | 15.43 | 14.10 | 14.97 | 17.20 | 14.35 | 20.40 | 13.67 | 23.60 | 13.03 | 26.80 | ||
| 1800 | 19.67 | 5.10 | 19.46 | 8.70 | 18.99 | 12.20 | 18.50 | 15.80 | 18.10 | 19.40 | 17.78 | 23.00 | 17.40 | 26.60 | 17.03 | 30.10 | ||
| 2000 | 21.75 | 5.60 | 20.85 | 9.60 | 20.17 | 13.60 | 19.59 | 17.60 | 19.08 | 21.60 | 18.62 | 25.50 | 18.20 | 29.50 | 17.81 | 33.50 | ||
| model | Exhaust port Dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 6015 |
150 (6”) | 800 | 14.90 | 3.60 | 14.22 | 6.60 | 13.94 | 9.60 | 12.86 | 12.60 | 10.40 | 14.30 | 8.70 | 16.30 | ||||
| 1000 | 19.38 | 4.60 | 18.71 | 8.30 | 17.43 | 12.00 | 16.34 | 15.80 | 15.20 | 19.93 | 14.20 | 22.93 | ||||||
| 1200 | 22.87 | 5.50 | 21.20 | 10.00 | 19.91 | 14.40 | 18.83 | 18.90 | 17.83 | 21.40 | 16.07 | 23.40 | ||||||
| 1400 | 27.36 | 6.40 | 25.68 | 11.60 | 24.40 | 16.80 | 23.31 | 22.10 | 22.02 | 25.00 | 20.12 | 28.00 | ||||||
| 1600 | 31.84 | 7.30 | 30.17 | 13.30 | 28.88 | 19.30 | 27.80 | 25.20 | 26.21 | 28.60 | 24.56 | 31.60 | ||||||
| 1800 | 36.33 | 8.20 | 34.65 | 14.90 | 33.37 | 21.70 | 32.28 | 28.40 | 30.40 | 32.20 | 27.49 | 36.20 | ||||||
| 2000 | 40.81 | 9.10 | 39.14 | 16.60 | 37.85 | 24.10 | 36.77 | 31.50 | 34.59 | 35.70 | 30.50 | 39.70 | ||||||
|
SL 7006 |
100 (4”) | 700 | 6.93 | 2.10 | 6.26 | 3.60 | 5.75 | 5.00 | 5.32 | 6.40 | 4.94 | 7.80 | 4.59 | 9.30 | 4.27 | 10.70 | 4.24 | 10.90 |
| 800 | 8.15 | 2.50 | 7.48 | 4.10 | 6.97 | 5.70 | 6.54 | 7.30 | 6.16 | 9.00 | 5.81 | 10.60 | 5.50 | 12.20 | 5.20 | 13.80 | ||
| 1000 | 10.59 | 3.10 | 9.92 | 5.10 | 9.41 | 7.10 | 8.98 | 9.20 | 8.60 | 11.20 | 8.25 | 13.20 | 7.94 | 15.30 | 7.64 | 17.30 | ||
| 1200 | 13.03 | 3.70 | 12.36 | 6.10 | 11.85 | 8.60 | 11.42 | 11.00 | 11.04 | 13.40 | 10.69 | 15.90 | 10.38 | 18.30 | 10.08 | 20.80 | ||
| 1400 | 15.47 | 4.30 | 14.81 | 7.10 | 14.29 | 10.00 | 13.86 | 12.80 | 13.48 | 15.70 | 13.13 | 18.50 | 12.82 | 21.40 | 12.52 | 24.20 | ||
| 1600 | 17.91 | 4.90 | 17.25 | 8.20 | 16.73 | 11.40 | 16.30 | 14.70 | 15.92 | 17.90 | 15.58 | 21.20 | 15.26 | 24.40 | 14.96 | 27.70 | ||
| model | Exhaust port Dia MM |
speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 7011 |
150 (6”) | 700 | 12.99 | 3.30 | 11.87 | 5.90 | 11.77 | 8.60 | 11.45 | 11.20 | 10.98 | 13.80 | 10.09 | 16.40 | 9.56 | 19.00 | ||
| 800 | 16.23 | 3.80 | 15.11 | 6.80 | 14.78 | 9.80 | 14.54 | 12.80 | 13.90 | 15.70 | 13.33 | 18.70 | 12.80 | 21.70 | 12.11 | 24.70 | ||
| 1000 | 20.71 | 4.80 | 19.59 | 8.50 | 18.74 | 12.20 | 18.02 | 16.00 | 17.38 | 19.70 | 16.81 | 23.40 | 16.28 | 27.10 | 14.79 | 30.90 | ||
| 1200 | 24.88 | 5.70 | 24.11 | 10.00 | 23.25 | 14.50 | 22.52 | 19.00 | 21.88 | 23.40 | 21.31 | 27.90 | 20.78 | 32.40 | 19.28 | 36.90 | ||
| 1400 | 29.72 | 6.50 | 28.59 | 11.70 | 27.73 | 16.90 | 27.00 | 22.10 | 26.36 | 27.40 | 25.79 | 32.60 | 25.26 | 37.80 | 24.76 | 43.00 | ||
| 1600 | 33.20 | 7.40 | 32.07 | 13.40 | 31.21 | 19.30 | 30.48 | 25.30 | 29.84 | 31.30 | 29.27 | 37.20 | 28.74 | 43.20 | 28.24 | 49.20 | ||
|
SL 7018 |
200 (8”) | 700 | 21.55 | 4.80 | 19.79 | 9.10 | 18.45 | 13.40 | 17.33 | 17.60 | 16.30 | 18.50 | 14.80 | 19.50 | ||||
| 800 | 26.22 | 5.50 | 25.46 | 10.40 | 24.12 | 15.30 | 23.56 | 20.20 | 22.70 | 26.50 | 20.70 | 30.50 | ||||||
| 1000 | 32.54 | 6.90 | 30.79 | 13.00 | 29.45 | 19.10 | 28.32 | 25.20 | 27.60 | 30.34 | 25.60 | 35.34 | ||||||
| 1200 | 39.87 | 8.30 | 38.12 | 15.60 | 36.77 | 22.90 | 35.65 | 30.20 | 34.90 | 35.60 | 32.63 | 40.60 | ||||||
| 1400 | 47.20 | 9.70 | 45.44 | 18.20 | 44.10 | 26.70 | 42.98 | 35.30 | 40.00 | 39.45 | 37.00 | 44.45 | ||||||
| 1600 | 54.53 | 11.00 | 52.77 | 20.80 | 51.43 | 30.60 | 50.30 | 40.30 | 48.65 | 44.20 | 43.55 | 50.20 | ||||||
| model | Exhaust port Dia MM |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 8016 |
200 (8”) | 700 | 20.38 | 7.05 | 18.18 | 10.56 | 16.54 | 14.36 | 15.11 | 17.37 | 13.90 | 21.58 | 12.80 | 25.78 | ||||
| 850 | 25.87 | 8.56 | 23.67 | 13.38 | 22.02 | 17.44 | 20.60 | 21.10 | 19.39 | 26.20 | 18.29 | 31.30 | ||||||
| 1000 | 31.35 | 10.08 | 29.16 | 15.09 | 27.51 | 20.52 | 26.09 | 24.82 | 24.88 | 30.82 | 23.78 | 36.82 | 22.72 | 42.83 | 21.80 | 48.83 | ||
| 1150 | 36.84 | 11.59 | 34.65 | 17.35 | 33.00 | 23.59 | 31.57 | 28.54 | 30.37 | 35.45 | 29.27 | 42.35 | 28.21 | 49.25 | 27.29 | 56.15 | ||
| 1250 | 40.50 | 12.60 | 38.30 | 18.86 | 36.66 | 25.65 | 35.23 | 31.02 | 34.02 | 38.53 | 32.93 | 46.03 | 31.87 | 53.53 | 30.95 | 61.04 | ||
| 1400 | 45.99 | 14.11 | 43.79 | 21.12 | 42.15 | 28.72 | 40.72 | 34.75 | 39.51 | 43.15 | 38.41 | 51.55 | 37.35 | 59.96 | 36.44 | 68.36 | ||
| 1500 | 49.65 | 15.11 | 47.45 | 22.63 | 45.80 | 30.78 | 44.38 | 37.23 | 43.17 | 46.23 | 42.07 | 55.24 | 41.01 | 64.24 | 40.10 | 73.24 | ||
|
SL 8024 |
250 (10”) | 700 | 30.85 | 9.34 | 27.73 | 14.94 | 25.32 | 20.92 | 23.29 | 25.74 | 21.54 | 32.04 | 19.95 | 38.33 | ||||
| 850 | 39.07 | 11.34 | 35.95 | 18.14 | 33.54 | 25.41 | 31.51 | 31.26 | 29.76 | 38.90 | 28.17 | 46.54 | ||||||
| 1000 | 47.29 | 13.34 | 44.17 | 21.34 | 41.76 | 29.89 | 39.73 | 36.77 | 37.98 | 45.77 | 36.39 | 54.76 | ||||||
| 1150 | 55.51 | 15.34 | 52.39 | 24.54 | 49.98 | 34.37 | 47.95 | 42.29 | 46.20 | 52.63 | 44.61 | 62.97 | ||||||
| 1250 | 60.99 | 16.67 | 57.87 | 26.67 | 55.46 | 37.36 | 53.43 | 45.97 | 51.68 | 57.21 | 50.09 | 68.45 | ||||||
| 1400 | 69.21 | 18.67 | 66.09 | 29.87 | 63.68 | 41.85 | 61.65 | 51.48 | 59.90 | 64.27 | 58.31 | 76.66 | ||||||
| 1500 | 74.69 | 20.01 | 71.57 | 32.00 | 69.16 | 44.84 | 67.13 | 55.16 | 65.38 | 68.65 | 63.79 | 82.14 | ||||||
| model | Exhaust port Dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 9020 |
250 (10”) | 700 | 34.83 | 10.06 | 31.68 | 16.32 | 29.26 | 23.00 | 27.20 | 28.40 | 25.44 | 35.35 | 23.81 | 42.31 | ||||
| 850 | 43.92 | 12.22 | 40.77 | 19.82 | 38.35 | 27.93 | 36.29 | 34.48 | 34.53 | 42.93 | 32.89 | 51.38 | ||||||
| 1000 | 53.01 | 14.37 | 49.86 | 23.32 | 47.43 | 32.86 | 45.37 | 40.57 | 43.62 | 50.50 | 41.98 | 60.44 | 40.47 | 70.38 | 39.13 | 80.32 | ||
| 1150 | 62.09 | 16.53 | 58.94 | 26.82 | 56.52 | 37.79 | 54.46 | 46.65 | 52.70 | 58.08 | 51.07 | 69.51 | 49.55 | 80.94 | 48.22 | 92.37 | ||
| 1250 | 68.15 | 17.96 | 65.00 | 29.15 | 62.58 | 41.08 | 60.52 | 50.71 | 58.76 | 63.13 | 57.13 | 75.55 | 55.61 | 87.98 | 54.28 | 100.40 | ||
| 1400 | 77.24 | 20.12 | 74.09 | 32.64 | 71.66 | 46.01 | 69.60 | 56.79 | 67.85 | 70.71 | 66.21 | 84.62 | 64.70 | 98.54 | 63.36 | 112.45 | ||
| 1500 | 83.30 | 21.56 | 80.15 | 34.98 | 77.72 | 49.30 | 75.66 | 60.85 | 73.91 | 75.76 | 72.27 | 90.67 | 70.76 | 105.57 | 69.42 | 120.48 | ||
|
SL 9030 |
300 (12”) | 700 | 52.65 | 13.82 | 48.12 | 23.54 | 44.68 | 33.83 | 41.78 | 42.20 | 39.24 | 52.61 | 36.97 | 63.01 | ||||
| 850 | 66.25 | 16.79 | 61.71 | 28.58 | 58.27 | 41.08 | 55.37 | 51.24 | 52.83 | 63.88 | 50.57 | 76.52 | ||||||
| 1000 | 79.84 | 19.75 | 75.31 | 33.62 | 71.86 | 48.32 | 68.96 | 60.28 | 66.43 | 75.15 | 64.16 | 90.02 | ||||||
| 1150 | 93.43 | 22.71 | 88.90 | 38.67 | 85.46 | 55.57 | 82.56 | 69.33 | 80.02 | 86.43 | 77.75 | 103.52 | ||||||
| 1250 | 102.49 | 25.67 | 97.96 | 43.71 | 94.52 | 62.82 | 91.62 | 78.37 | 89.08 | 97.70 | 86.82 | 117.03 | ||||||
| 1400 | 116.09 | 27.65 | 111.56 | 47.07 | 108.11 | 67.65 | 105.21 | 84.40 | 102.68 | 105.21 | 100.41 | 126.03 | ||||||
| 1500 | 125.15 | 29.62 | 120.62 | 50.44 | 117.18 | 72.49 | 114.28 | 90.43 | 111.74 | 112.73 | 109.47 | 135.03 | ||||||
| Model | Exhaust port Dia (MM) |
Speed | Different pressure for different Inlet air flow (M3/min) & shaft power (kw) | |||||||||||||||
| 0.1kgf/cm2 | 0.2kgf/cm2 | 0.3kgf/cm2 | 0.4kgf/cm2 | 0.5kgf/cm2 | 0.6kgf/cm2 | 0.7kgf/cm2 | 0.8kgf/cm2 | |||||||||||
|
RPM | 1000mmH20 | 2000mmH20 | 3000mmH20 | 4000mmH20 | 5000mmH20 | 6000mmH20 | 7000mmH20 | 8000mmH20 | ||||||||||
| 0.01Mpa | 0.02Mpa | 0.03Mpa | 0.04Mpa | 0.05Mpa | 0.06Mpa | 0.07Mpa | 0.08Mpa | |||||||||||
| M3/min | KW | M3/min | kW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | M3/min | KW | |||
|
SL 10027 |
300 (12”) | 800 | 74.04 | 17.21 | 69.22 | 29.60 | 65.60 | 42.71 | 62.59 | 53.39 | 59.88 | 66.58 | 57.57 | 79.77 | ||||
| 900 | 79.06 | 19.36 | 74.24 | 33.30 | 70.63 | 48.05 | 67.61 | 60.07 | 64.90 | 74.90 | 62.59 | 89.74 | ||||||
| 1000 | 89.11 | 21.51 | 84.29 | 37.00 | 80.67 | 53.39 | 77.66 | 66.74 | 74.95 | 83.23 | 72.64 | 99.71 | 70.32 | 116.19 | 68.32 | 132.68 | ||
| 1100 | 99.16 | 23.66 | 94.34 | 40.70 | 90.72 | 58.73 | 87.70 | 73.42 | 84.99 | 91.55 | 82.68 | 109.68 | 80.37 | 127.81 | 78.36 | 145.94 | ||
| 1250 | 114.23 | 26.89 | 109.41 | 46.25 | 105.79 | 66.74 | 102.77 | 83.43 | 100.06 | 104.03 | 97.75 | 124.64 | 95.44 | 145.24 | 93.43 | 165.85 | ||
| 1400 | 129.30 | 30.11 | 124.47 | 51.80 | 120.86 | 74.74 | 117.84 | 93.44 | 115.13 | 116.52 | 112.82 | 139.59 | 110.51 | 162.67 | 108.50 | 185.75 | ||
|
SL 10034 |
350 (14”) | 800 | 94.08 | 20.95 | 88.39 | 36.78 | 84.08 | 53.48 | 80.41 | 67.13 | 77.24 | 83.75 | 74.33 | 100.37 | ||||
| 900 | 100.42 | 23.57 | 94.72 | 41.38 | 90.41 | 60.17 | 86.74 | 75.52 | 83.57 | 94.22 | 80.66 | 112.92 | ||||||
| 1000 | 113.08 | 26.19 | 107.38 | 45.98 | 103.07 | 66.85 | 99.40 | 83.91 | 96.24 | 104.69 | 93.32 | 125.47 | ||||||
| 1100 | 125.74 | 30.12 | 120.04 | 52.87 | 115.74 | 76.88 | 112.06 | 96.50 | 108.90 | 120.39 | 105.99 | 144.28 | ||||||
| 1250 | 144.73 | 34.05 | 139.04 | 59.77 | 134.73 | 86.91 | 131.06 | 109.09 | 127.89 | 136.10 | 124.98 | 163.10 | ||||||
| 1400 | 163.73 | 36.67 | 158.03 | 64.37 | 153.72 | 93.59 | 150.05 | 117.48 | 146.89 | 146.56 | 143.97 | 175.65 | ||||||
Company Profile
Jiangsu Sinocoredrill Exploration Equipment Co., Ltd
Jiangsu Sinocoredrill Exploration Equipment Co., Ltd a professional Chinese manufacturer specializing in mineral exploration drilling equipments in business to since 2008.Through the close cooperation with customers and business partners, Sinocoredrill is making continuous innovation for achieving its goal of superior productivity.Owing to our products' excellent performance and very competitive pricing, we successfully minimized our every customer's drilling cost per meter. we have profuse designs with series quality grade and expressly , our price is very competitive cause we're manufactory .
We has passed the quality system certification of GB/T19001-2008/IS9001:2008. Our company has also won the honors such as Jiangsu High-quality Product and Jiangsu Contract Compliance and Creditworthy Company. As the Chinese Specialist Of Geological Exploration Tools Manufactory And Supplier, our company is founded with the hard work of our employees for many years. Our company has developed into a professional manufacturer of drilling equipment and tools, such as HDD (No-dig) drill rod , , Wireline drilling rod and tools , various of diamond impregnated and surface-set core bit , reaming shell with the the automatic production line.
Our company is mainly engaged in the production of B /N /H /P WL wireline core barrel drilling tools, drill rod , overshot assembly , diamond core bit ,reaming shell , full- hydraulic core drilling rig and mud pump for clients both at home and abroad.
With many years’ experience in the production and sale as well as strong technical ability, our company has offered the high-quality brand of SINOCOREDRILL wholeheartedly, including the advanced CNC lathe, CNC machining center and CNC sintering diamond bit and reamer device. With a marketing network covering China, our company has given top priority to the quality and also targeted at the market.
By clinging to the concept of the quality and service being supreme, our company has set up a positive company image and won the wide acclaim from our clients. In order to offer better products and services as well as satisfy the growing requirement of the market at the lowest cost, our company has made great efforts to develop new product and innovate the technology. We have also sincerely welcomed those old and news clients to join us.
Send your message to this supplier
You May Like
High Pressure 220V Roots Air Blower Three Lobe Double Tank Rpm 700 - 2200 Speed
High Efficiency Low Noise 20mm - 80mm Rotary Air Blowers Rpm 390
Low Energy Consumption Hc Series Hc 251s Rotary Air Blowers Low Noise
Ul Listed 1/2-4" Reduced Wall Aluminum Flexible Conduit
Truck Mounted Multi Function Engineering Drilling Machine 150m Civil Building Water Well M150
Flexible Core Drill Rig C6/C6C Core Drilling Rig For Various Drilling Operations Atlas Copco
HWL Drilling Depth 1000m Wheel Trailer Hydraulic Core Drilling Machine
Core Drill Rig 179kw Core Drilling Rig Hydraulic Drill Machine For Coal Mining HYDX-6
CR12 1200m Full Hydraulic Surface Core Drill Rig Cummins Diesel Engine 153kW (205HP)
Large Power Spindle Speed Diamond Drill Rig 22kw 1470rmp Drilling Depth Up To 600 Meters
Light Portable Core Drill Rig Crawler-Mounted Engineering Drilling Machine
Multi-functional Core Drill Rig OUNCE WELL RC6 Water Well Drilling Rig
HYDX - 5A Full Hydraulic Core Drill Rig With Crawler Mountd NQ 1300m HQ 1000m
HCR-8 Core Drill Rig Full Hydraulic Drilling Rig With 7200Nm Torque , 264KW/2200rpm
400KN Horizontal Directional Drilling Machine , НDD Rig FDP-40
960 KN 194KW horizontal drilling drilling machine with CE ISO certification
high Torque Water Bore Well 275KN Hdd Drill Rig
Hydraulic 13500N·M Horizontal Directional Drilling Rig
Commins Diesel Engine 45/70T Hdd Drilling Rig
High Power Crawler 194KW Horizontal Directional Drilling Rigs
Crawler Type 1000 Tons Horizontal Directional Drilling Rigs
97KW power engine Horizontal Directional Drilling Rigs , Comfortable Hdd Rig
Truck Crawler HDD Rig
Top Drive Rig Rotary-drilling with reverse circulation CBM universal Drilling Rig
Rotary CBM Drilling Rig With Hydraulic Winch / Mud Pumps For Drilling Rigs
Small Trailer Mounted CBM Drilling Rig / Core Drill Rig For Exploration
Trailer Mounted CBM Drilling Rig
Rotary CBM Drilling Rig
Truck Mounted MD - 750 CBM Drilling Rig / Core Drill Rig , Drill Depth 3200m 2200m 1600m
Hydraulic Horizontal CBM Drilling Rig MD-750 With High Torque 34000N·m
Directional Hydraulic CBM Drilling Rig / Mining Drilling Rig , High Performance
Automatic Rotary CBM drilling Rig MD-750 With Diesel Engine Power Of 275kw
32 Tons 12000NM Horizontal Directional Drilling Machine / Directional Drilling Equipment
Face Discharge Step Natural Diamond Core Bit HQ3 Surface Set Drill Bits
Inquiry Cart
0