High Performance Gravel Suction Pump Wear Parts High Chrome Impeller OEM Available

Wear Resistant Spare Part of sand gravel Pump high chrome alloy

Sand gravel suction pump spare parts main features

Our Sand gravel suction pump wear parts are designed by Spatial Structure CFD and Impeller Casting CAE. Our pump wear parts are made in our foundry and finished in our workshop with strict quality control. These high quality alloy wet- ends provide our customers with longer wear life due to metallurgical advancements and improved efficiency due to patented hydraulics. The users enjoy perfect fit and finish to reduce installation workload. Whether solids transport in the front-end, in-plant processing or tailings, we can produce the best parts for your application.

1. Slurry pump spare parts are mainly made of high-chromium alloy, hard nickel alloy, hastelloy alloy or elastic material, depending on the demand for chromium content in practical application.
2. Most of our slurry pump rubber parts contain natural rubber and synthetic rubber .The natural rubber type shows
some excellent properties ,such as good resistance to acid and corrosive slurry ,good abrasion resistance to small particles, etc. On the other hand, the synthetic rubber type possesses outstanding resistance to abrasion, corrosion as well as high temperature.
3.The slurry pump spare parts we supplied are suitable for standard slurry pump including vertical sump pump ,gravel pump and related 4 mining pumps ,and these products are all qualified .In addition ,we have built up our own factory for casting ,machining, testing and other procedures .
4. OEM drawing of slurry pump is acceptable, and we will provide our client with samples first for the quality inspection .

Slurry pump parts-----impeller:

The pump impeller is made of rubber or metal, and the metal liner and rubber liner are interchangeable .The back vane can reduce the sealing pressure ,and it can also cut down backflow to the largest extent at the same time .On the other hand ,cast-in impeller threads are more suitable for slurry .

Slurry pump parts-shaft sleeve

With ceramic coating----high hardness and fracture
toughness and wear resistant
Shaft sleeve manage wear to minimize shaft cost.
Wherever there is a bearing support for the shaft, centrifugally cast shaft sleeves are used to prevent wear to the shaft. Refurbishment of the shaft is simply a matter of replacing the sleeve and reusing the shaft.

Slurry pump parts- cover plate& frame plate

Slurry pump cover plate & frame plate for heavy duty centrifugal slurry pump in axial direction is used to bear pressure, and the liner is wear-resistant.

Slurry pumps parts-cover plate liner & frame plate liner

The cover plate is produced using elastomer or hard metal,
such as natural rubber, high - chromium alloy, etc.
It has various sizes and styles, and the installation is very easy. Additionally, OEM design is accepted. This product is also named as slurry pump liner, and it is also an overflow component. It can form a pump chamber with throat bush and frame plate liner insert. Meanwhile, it is white iron with high-chromium alloy whose content as much as 27%, and it shows good resistance to abrasion .

Slurry pump parts--packing (pump seal)

The sealing method contains packing seal, centrifugal seal and mechanical seal. The packing is usually used for packing seal and centrifugal seal, and our product has different models .Clients are recommended to buy two boxes of packing at one time which are sufficient for one pump

Slurry pump spare pats-Volute liner

This is volute liner for slurry pump with excellent wear resistance, corrosion resistance and large passage area.
Good casing design makes maintenance easily and cost much lower. Advanced heat treat technology is used to treat high chrome alloy and results with a compact micro-structure and a high quality product.

Slurry pump parts-bearing assembly

Bearing assembly uses cylindrical structure, adjusting the space between impeller & front liner easily, being removed completely when being repaired.

Slurry pump OEM parts

They are made of iron, steel, rubber or high-chromium alloy. After the OEM parts are supplied by us depending on the machining drawing, andomponents are produced, we will provide customer with sample for quality detection.

Shijiazhuang Aier Machinery Co., Ltd. is a large-scale professional manufacturer of slurry pumps, gravel pumps, dredge pumps, sewage pumps and clean water pumps in China.

All products are mainly supplied to environmental protection, wastewater treatment, urban water supply and drainage, mine, metallurgy, coal, petrochemical, building material, thermal power FGD, river dredging, tailing disposal and other fields. The products are selling well in China and sold far to Germany, U.S., Canada, Australia, Russia, Ukraine, Kazakhstan, Brasil, Chile, Argentina, Bolivia, Malaysia, Indonesia, India, Poland, South Africa, Tanzania, etc.

Our firm has strong technical force and is specially engaged in the research of abrasion resistant materials of slurry pumps, sewage pumps and water pumps and the development of new products. The materials include high chrome white iron, duplex stainless steel, stainless steel, ductile iron, rubber, etc.

We use CFD, CAD method for product design and process design based absorbing experience of world leading pump companies. We integrate molding, smelting, casting, heat treatment, machining and chemical analysis, and have professional engineering and technical personnel.

Our company started to build our new factory in 2013 and finished in Spring of 2014. The new factory is located in Lincheng Xingtai Hebei, covering 67,000 m² and of annual design annual casting capacity 3,000 tons. In the new factory, we can produce different parts from small to huge. Casting & machining orders are welcome as well.