
Leroy Somer Automatic Voltage Regulators Diesel Generator AVR R449
Brief Introduction:
The circuitry of the R449 Automatic Voltage Regulator (AVR)
provides closed loop control of the alternator output voltage by
regulating the exciter field current. The primary winding has a
voltage in ratio to that of the alternator (characteristic shunt),
the next has a voltage in proportion to the stator current
(compound characteristic: booster effect). Which is powered by two
auxiliary windings which are independent of the voltage equal
circuit. The power supply voltage is rectified and filtered before
being used by the AVR monitoring transistor. With PMG excitatioin,
a permanent magnet generator (PMG) added to the alternator supplies
the AVR with voltage which is free of the main alternator winding.
This is built-in at the rear of the machine and connected to the
R448 AVR, and the ST9 jumper must be disconnected.
Sensing Input | Terminal 0-110V = 95~140V Terminal 0-220V = 170~260V Terminal 0-380V = 340~520V Frequency 50/60 Hz selectable |
---|---|
Power Input | Voltage 40~150 VAC 3 phase |
Output Current | Max. 10A |
Current Droop | Max. 4% @ P.F.=0.8 |
Voltage Regulation | < ±0.5% (with 4% engine governing) |
Voltage Build-up | Residual volts at AVR terminal > 5 VAC |
Voltage Output | Max. 160 VDC @ 120 VAC |
External Voltage Adjustment | ±10% @ 1 K Ohm 1 watt trimmer |
Auxiliary Winding | 6~150 VAC (No load rms) |
Response Time | 0.3~1 sec. @ ±20% voltage vibration |
LAM Voltage Droop Rate | 10% & 15% selectable |
Environment | Operating Temperature : -40~60 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz |
AVR Controls Functions | VOLT : Voltage Adjustment STAB : Stability Adjustment V/HZ : UFRO Knee Point Set EXC.MAX : Excitation Current Limit STAT : Droop Adjustment |
Dimensions | 203.0 (L) x 153.0 (W) x 60.5 (H) mm |
Weight | 970g ±2% |
Warranty: 2 years
after receiving payment, We offer two way delivery:
Delivery: 1. Quantity below 100pcs, within 2-3 days
2. Quantity above 100 pcs, within 7 days
Payment: T/T,Western union, L/C and Cash
Shipment Term
1. We Ship to Worldwide, except APO/FPO
2. Orders processed timely after showing remittance copy.
3. We only ship to confirmed order addresses. Your order address
MUST MATCH your address.
4.Items are shipped from China by Airmail, reach most of the
countries within 4 to 20 business days.
5.Delivery time depends on destination and other factors, it may
takes up to 20 business days.
6. SERVICE TRANSIT TIME is provided by the carrier and excludes
weekends and holidays. Transit times may vary, particularly during
the holiday season.
7. If you have not received your shipment within 30 days from
payment, please contact us. We will track the shipment and get back
to you as soon as possible with a reply. Our goal is customer
satisfaction!
Guarantee
1. Guarantee:1 year after selled.
2. During guarantee,the items share free repairs or replacement.
3. Customer is responsible for the freight come-and-go,and the
custom tax.
4. You may consider to send the defective item with a economical
way,and we send back the repaired items with your new order
together.
5. To save the cost,pls send the item back without packing.
6. Pls provide the defective appearance and related invoice number.
7.We do not repair or replace item with an expired warranty.
8.All emails will be answered within 1 business day. If you do not
receive our reply, please kindly re-sent your email or give us a
call any time.
Guangdong ALI Testing Equipment Co,.Ltd
Since establishment in 1985, Guangdong ALI Testing Equipment Co., Ltd, a wholly-owned subsidiary of GSKA Group has been providing a wide and complete range of products and services to the society. GSKA has now 16 offices, warehouses and service centres in China, with head office loCAT-partsed in Hong Kong. There are more than 100 employees in GSKA Group, and we are expanding into many industries with rapid expanding pace of China.
There are mainly 4 departments in GSKA Group, namely:
1) Construction and Mining equipment
GSKA has been cooperating with many international famous brands in
China, such as Ingersoll-rand, Atlas Copco and Liebherr. Our
products include concrete batching plants, concrete mixers,
hydraulic crawler drills, pneumatic crawler drills, water well
drills, air compressors, road compactors, breakers and various
other equipment. We are major in several industries, such as
hydro-electric power plants, cement quarries, coal mines and
railway systems.
In order to provide a quick response to our customers, we have stocked over US$1.5 Million spare parts of Ingersoll-rand and Atlas Copco in our Chinese warehouse. Recently, we have exported small air compressors, pneumatic crawler drills, water well drills and drilling accessories and spare parts to overseas market.
2) Power Group
GSKA has been supplying CAT-parts and Broadcrown gensets for more than
15 years. Our major customers include Telecoms, Banks, Airports,
Factories and many other sectors in the society. We are also doing
assembly of gensets in China, under our brand name of "GSKA " with ratings from 1KVA to 2000KVA. The quality of "GSKA " genset has won a very good reputation from customers in China and
overseas market.
We are also the specialists for genuine spare parts, such as CAT-parts, Perkins, FG Wilson, Cummins, , Volvo, etc.
Besides gensets, we also provide total solution on the power problems, such as Powerware - UPS, DC system and battery ,lightning equipment and many other electronic products.
3) Security and IT Group
GSKA acquired famous USA brand name Locktronix in 2004 and started
manufacture electric locks in China. Since then, we have been
exported products to the Middle East, South Asia and Africa. Our
market is expanding each year and we are looking for more
distributors in different countries to be our business partners.
Besides electric locks and accessories, we have also developed our
own access control system by our software team. The system includes
smart card solution and also biometric access control, such as
hand-key, fingerprint and facial recognition. Our EC-PAYROLL system
has been widely used in many factories both in Hong Kong and
mainland China.
After all, GSKA has an objective of "Always Provide the Best" and we shall consistently provide high quality products and reliable services to our worldwide customers. We are looking forward to making good business with our partners