
Leroy Somer Alternator Spare Part Automatic Voltage regulators avr R450
AVR for Brushless Generator R450
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers. Both the SHUNT/AREP & PMG excitation systems are controlled by the AVR. With AREP excitation, the electronic AVR is powered by two auxiliary windings which are independent of the voltage sensing circuit. The connection is realised by “Faston”connectors and the voltage sensing is single - phase.Operating temperature: - 30℃ to + 65℃.Good stability and high quality.
Features:
1. Leroy SomerAutomatic Voltage Regulator R450
2. Single or three phase voltage sensing with optional module.
3. Load acceptance module, PMG / AREP excitation system
4. Phase to phase voltage sensing.
5. Suitable for high levels of vibration and harsh environments
Main characteristics:
1.Voltage regulation +/- 0.5% at steady state and constant speed.
2. Control by transistor means that the regulation quality is independant of applied load.
3. Phase to phase voltage sensing.
4.Suitable for high levels of vibration and harsh environments.
5. Integrated "LAM" and " auto adaptative LAM" system to cope with load impacts applied to the engine
6. AREP or PMG excitation with normal or fast response.
7. Single or three phase voltage sensing with optional module.
8. Rotating switch facilitating selection.
Description:
Leroy somer R450 AVR is powered by two auxiliary windings which are independent of the voltage equal circuit. The power supply voltage is rectified and filtered before being used by the AVR monitoring transistor. With PMG excitation, a permanent magnet generator (PMG) added to the alternator supplies the AVR with voltage.
On AppliCAT-parts-partsion of load, the rotation speed of the generator set deceases, when it passes below the preset frequency threshold the LAM causes the voltage to drop by approximately13% or 25% and consequently the quantity of active load applied is reduced by approximately 25% to 45%, until the speed reaches its rated value again. Hence the LAM can be used either to reduce the speed variation (frequency) and its duration for a given applied load, or to increase the applied load probable for one speed variation (turbo-charged engine).
Datasheet:
Leroy Somer AVR | R450 |
Sensing voltage | terminal 0-110V=95-140V terminal 0-220V =170-260V terminal 0-380V=340-520V |
Frequency | 50-60Hz |
Voltage input | 40-50VAC, 3 phase |
Harmpnic auxiliary winding | 6-150VAC (no-load rms) |
Output Voltage | max 160VDC at 120VAC input |
Current | max 10A |
Resistance | 15 Ω minimum |
Regulation | +/-5% RMS with 4% engine governing |
Voltage build-up | Residual voltage at avr terminal≥5VAC |
External Voltage Adjustment | +/-10% with 1k ohm 1 watt trimmer |
1. Leroy SomerAutomatic Voltage Regulator R450
2. Single or three phase voltage sensing with optional module.
3. Load acceptance module, PMG / AREP excitation system
4. Phase to phase voltage sensing.
5. Suitable for high levels of vibration and harsh environments
Main characteristics:
§ Voltage regulation +/- 0.5% at steady state and constant speed.
§ Control by transistor means that the regulation quality is independant of applied load.
§ Phase to phase voltage sensing.
§ Suitable for high levels of vibration and harsh environments.
§ Integrated "LAM" and " auto adaptative LAM" system to cope with load impacts applied to the engine
§ AREP or PMG excitation with normal or fast response.
§ Single or three phase voltage sensing with optional module.
§ Rotating switch facilitating selection.
R450 | |
Voltage | 230± 2V |
Voltage Steady Range | ± 1V |
Starting Excitation Voltage | ≥1.5V |
Loading Capacity | With 110% loading, the regulator can work normally |
Output Voltage Steady on hot and cool condition | ≤2V |
Temperature float on Output Voltage | ≤2V |
Guangdong ALI Testing Equipment Co,.Ltd
Since establishment in 1985, Guangdong ALI Testing Equipment Co., Ltd, a wholly-owned subsidiary of GSKA Group has been providing a wide and complete range of products and services to the society. GSKA has now 16 offices, warehouses and service centres in China, with head office loCAT-partsed in Hong Kong. There are more than 100 employees in GSKA Group, and we are expanding into many industries with rapid expanding pace of China.
There are mainly 4 departments in GSKA Group, namely:
1) Construction and Mining equipment
GSKA has been cooperating with many international famous brands in
China, such as Ingersoll-rand, Atlas Copco and Liebherr. Our
products include concrete batching plants, concrete mixers,
hydraulic crawler drills, pneumatic crawler drills, water well
drills, air compressors, road compactors, breakers and various
other equipment. We are major in several industries, such as
hydro-electric power plants, cement quarries, coal mines and
railway systems.
In order to provide a quick response to our customers, we have stocked over US$1.5 Million spare parts of Ingersoll-rand and Atlas Copco in our Chinese warehouse. Recently, we have exported small air compressors, pneumatic crawler drills, water well drills and drilling accessories and spare parts to overseas market.
2) Power Group
GSKA has been supplying CAT-parts and Broadcrown gensets for more than
15 years. Our major customers include Telecoms, Banks, Airports,
Factories and many other sectors in the society. We are also doing
assembly of gensets in China, under our brand name of "GSKA " with ratings from 1KVA to 2000KVA. The quality of "GSKA " genset has won a very good reputation from customers in China and
overseas market.
We are also the specialists for genuine spare parts, such as CAT-parts, Perkins, FG Wilson, Cummins, , Volvo, etc.
Besides gensets, we also provide total solution on the power problems, such as Powerware - UPS, DC system and battery ,lightning equipment and many other electronic products.
3) Security and IT Group
GSKA acquired famous USA brand name Locktronix in 2004 and started
manufacture electric locks in China. Since then, we have been
exported products to the Middle East, South Asia and Africa. Our
market is expanding each year and we are looking for more
distributors in different countries to be our business partners.
Besides electric locks and accessories, we have also developed our
own access control system by our software team. The system includes
smart card solution and also biometric access control, such as
hand-key, fingerprint and facial recognition. Our EC-PAYROLL system
has been widely used in many factories both in Hong Kong and
mainland China.
After all, GSKA has an objective of "Always Provide the Best" and we shall consistently provide high quality products and reliable services to our worldwide customers. We are looking forward to making good business with our partners